Water Solenoid Valve 2W12

Characteristic :  1.Direct lifting diaphragm construction; 

                          2.Open from zero bar for low pressure system use

                          3.High frequency of DIN plug coil

Medium :            Air, City Gas, Water, Oil, Petroleum, etc.

Temperature:     NBR Seal: 14F to 176F , -10 to 80

                          EPDM Seal:  14F to 250F ,  -10 to 120

                          VITON Seal : 14F to 300F, -10 to 150

Pressure:          2W12: 0.00MPa ~ 1.0MPa

Port Size:          3/8,1/2,3/4,1,1 1/4,1 1/2,2

Port Thread:      BSPP ,BSPT ,NPT ,Flange, UNF, M8X1

Orifice (mm):     12,15,20,25,32,40,50

Voltage:             DC - 12V,24V

                          AC - 24V,120V, 240V@60HZ 110V, 220V@50HZ

                          Tolerance: +/- 10%

Coils :                S51B, 40VA(AC), 30W(DC), IP65 100%ED

Material:            Body - Brass or Stainless steel

                          Seal -NBR, EPDM, PTFE or VITON

                          Armature Tube - Stainless Steel 304

                          Plunger - Stainless Steel 430F

                          Stop -SS430F

                          Springs - SS 304

                          Shading Rings - Stainless Steel 304