China Gate Valve Model Specification Description

Author:China Gate Valve     Published time:2018-05-05 10:51     Reading times:1061    

China gate valve manufacturers today will focus on the gate valve models, gate valve specifications, gate valve model descriptions, and gate valve model representations.


1 China gate valve model preparation method standard


The gate valve model preparation method adopts the recommended national standard "GB/T 32808-2016 valve model preparation method"


2 China gate valve model preparation method


The type of gate valve consists of 7 units, which are valve type, drive method, connection type, structure type, sealing surface material or lining material type, pressure code or working pressure at working temperature, and valve body material. The model is represented as follows:


I (Unit 1) II (Unit 2) III (Unit 3) IV (Unit 4) V (Unit 5) - Unit VI (Unit 6) VII (Unit 7)


I (Unit 1): Valve Type Code


II (Unit 2): Drive Method Code


III (3 units): Connection form code


IV (4 units): Structure type code


V (Unit 5): Seat seal face material or liner material designator


VI (Unit 6): Nominal pressure code or operating pressure code at operating temperature


VII (Unit 7): Body Material Code


3 China Gate Valve Modeling Example


Z41H-16C

Manual, flanged, plain rod wedge single gate, seat sealing surface material Cr13 stainless steel, nominal pressure PN16 (working pressure 1.6 MPa), valve body material for carbon steel gate valve: Z41H PN16 steel wedge Valve

Z6s41Y-25

Pneumatic manual, flanged, open-wedge rigid single gate, valve seat sealing surface material is carbide, nominal pressure is PN25 (working pressure 2.5 MPa), valve body material is carbon steel gate valve: Z6s41Y type PN25 Pneumatic manual wedge valve

Z540Y-40I

Bevel gear drive, flange connection, open rod wedge type flexible gate, valve seat sealing surface made of hard alloy, nominal pressure PN40 (working pressure 4.0 MPa), valve body material 1Cr5Mo chrome molybdenum steel gate valve: Z540Y type PN40 Steel Bevel Gear Drive Wedge Valve

Z944W-16Q

Electric, flanged, parallel rod type rigid double gate plate, valve seat sealing surface material is nodular cast iron, nominal pressure PN16 (working pressure 1.6 MPa), valve body material is ductile iron gate valve: Z944W type PN16 iron electric parallel Double gate valve

Z60Y-320

Hand-operated, butt-welded connection, open-wedge flexible gate, valve seat sealing surface made of hard alloy, nominal pressure PN320 (working pressure 32.0 MPa), and valve body material made of carbon steel: Z60Y-320 type power station High temperature and pressure butt welding connection wedge valve


Skype
Email
TOP