China Gate Valve Factory introduces the way of gate valve movement

China Gate Valve Factory-TJL indusry group today introduces you to the way of gate valve movement? The gate valve is a shutter of the opening and closing member. The direction of movement of the gate is perpendicular to the direction of the fluid. The gate valve can only be fully open and fully closed, and cannot be adjusted and throttled. The gate valve is sealed by the valve seat and the gate contact, and the sealing surface is usually welded with a metal material to increase the wear resistance. The gate has a rigid gate and an elastic gate. According to the gate, the gate valve is divided into a rigid gate valve and a resilient gate valve. China Gate Valve Factory TJL takes everyone to understand what is the movement mode of the gate valve?

When the gate valve is closed, the sealing surface can be sealed only by the medium pressure, that is, the sealing surface of the shutter is pressed against the valve seat of the other side only by the medium pressure to ensure the sealing of the sealing surface, which is self-sealing. Most of the gate valves are forced to seal, that is, when the valve is closed, the external force is forced to press the gate to the valve seat to ensure the sealing of the sealing surface.

Gate Valv Movement Mode: The gate of the gate valve moves linearly with the valve stem, also called the open gate valve. Usually, trapezoidal threads are provided on the lifting rod, and the rotary motion is changed into a linear motion by the nut at the top end of the valve and the guide groove on the valve body, that is, the operating torque is changed to the operating thrust. When the valve is opened, when the lifting height of the shutter is equal to 1:1 times the diameter of the valve, the passage of the fluid is completely unblocked, but this position cannot be monitored during operation.

In actual use, the apex of the valve stem is used as a mark, that is, the position where the valve is opened, as its fully open position. In order to consider the temperature change, the lock phenomenon is usually turned on to the apex position, and then back to 1/2-1 turn as the position of the fully open valve. Therefore, the fully open position of the valve is determined by the position of the shutter (ie, stroke). The approximate motion of the gate valve is such.