China Solenoid Valve

Author:China Solenoid Valve Manufacture     Published time:2018-09-02 09:21     Reading times:961    

Introduction to China Solenoid Valve


China Solenoid Valve is an electromagnetically controlled industrial equipment. It is an automatic basic component used to control fluids. It is an actuator and is not limited to hydraulic or pneumatic. Used in industrial control systems to adjust the direction, flow, speed and other parameters of the media. The Solenoid Valve can be used with different circuits to achieve the desired control, while the precision and flexibility of the control are guaranteed. There are many kinds of China Solenoid Valves. Different solenoid valves work in different positions of the control system. The most common ones are check valves, safety valves, directional control valves, speed control valves, etc.


How does China Solenoid Valve work?


There are closed chambers in the solenoid valve. There are through holes in different positions. Each hole is connected with different oil pipes. The middle part of the cavity is a piston. On both sides are two electromagnets. Which side of the magnet coil is energized? Side, by controlling the movement of the valve body to open or close different oil drain holes, and the oil inlet hole is normally open, the hydraulic oil will enter different oil drain pipes, and then the pressure of the oil pushes the piston of the oil cylinder, and the piston Drive the piston rod, and the piston rod drives the mechanical device. This controls the mechanical motion by controlling the current through and off of the electromagnet.



Skype
Email
TOP